Welcome To Real Expert Mobile Phone Repair Qatar
 Call : +97470300924

service guidelines

  • Home
  • service guidelines
  • Software Solution
  • Hardware Solution
  • Mobile Troubleshooting

As we all know that no computer hardware can function effectively without a corresponding software. Your hardware will most definitely be an expensive decoration without a software. Before any software issue arises, your phone must have being given you signs like restarts, freezing, slow response. Basic software glitches like 45% of common software problems can be solved by simply restarting your phone. It is advisable to always be on the latest firmware upgrade for your phone.

You need to stick to the following habits if you do not want to get into software problems with your phones. For iPhone, iPad and iPod install the latest software upgrade. If you are a normal user and you do not want to encounter any serious software problems, “Avoid Jailbreaking” your apple device. Jailbreak should be left to geeks and developers or anyone who knows the risks. Avoid using of iPhone by switch on the wifi hotspot for long time. Do not always allow your iPhone to die completely before recharging, not use fake iPhone charger and note down your iPhone’s software version and build in case of emergency you can find this in Settings>>General>>About. Finally, avoid using any CPU-hogging app extensively and also not use your iPhone while charging

To prevent your android from having software problems just follow these basic methods. Restart your phone every once in a while even when it is not hanging. When you are upgrading your phone’s firmware, do not allow your battery to die in the process. Always quit unused apps running in the background with the multitask button. Do not allow your available storage to get filled up for whatever reason. Always keep a tab on this. Make sure your bluetooth is not left opened unnecessarily and watch the phones from which you receive files, not use corrupt memory card.

The problem may be beyond your scope of knowledge. Get in touch with professionals to help with repairs like mobile phone repair qatar, a trusted mobile service center in Doha,Qatar for all branded mobiles.

Fixing hardware problems is not been easy and takes a lot of time to consume rather than software problems, it is because when it comes to software handling you don't really need to open or dismantle a mobile phone handset, because only few of them really need to. In most cases like this, many among mobile phones technician focus on software handling like especially unlocking, for it less time consuming and more flexible to do with. Various mobile phones have different circuits and components or parts layouts and designs.

Before proceeding to anything always consider the fact that a mobile phones handset is fragile object. Check and have take a look around every inch of the handsets package and layout, In this manner you can identify if the handset is in repairable condition, something like checking the whole printed circuit board components and parts, if it is free from dust,corrosion, bended,breakage etc.

Services we offer and how we approach it.

Mobile speaker problem:-

We service all brands of mobile phones. Mobile not ringing issue :-If you have placed your mobile phone in normal mode but yet not hearing a ringing sound when you get a call it is likely to be a problem with your ringer. In most of the Android phones ringer is known as Speaker, Melody etc.Solution for this are

  • Open diagnostic mode, check ringer volume and silent mode
  • Cleaning ringer point and connector
  • Use multimeter to check ringer expecting a value to be 8 ~10 ohm. If it is not between this range we replace the ringer.
  • Will keep track of ringer and perform jumper whenever required.
  • Verify ringer I.C and heat or replace if needed.
  • Check Logic IC heat or change if required.

Vibrator Issues:-

Your mobile phone operates using a motor which is controlled by Logic IC or Power IC. Common Issues Seen are Vibrator does not work or vibration with interpretation, hangs during vibration.Solution for this are

  • As an initial step we check mobile vibration settings to see if it is ON or OFF
  • Clean vibrator Tips connector
  • Check it with multimeter placing in Buzzer mode expecting a value of 8~16 ohm and if the value is not between this have to change the motor.
  • Check Logic IC heat or change if required.

Screen problems and solution:-

There are different touch screen sizes available and different phones have different screen sizes. There are mainly four points.(+),(-),(RX),(TX).PDA or touch screen is controlled by CPU and in some mobile phones there is an interface IC which is called as PDA IC or touch screen IC.

    Problems

  • Touch screen not working
  • Only half of the keys works.
  • When you press one key another one works

    • Solution

  • Check in settings if you have enabled both touch screen and keypad.
  • Reordering and clean PDA tips and Connector.
  • Replace PDA
  • Heat or change PDA IC
  • Heat, Reball or change CPU

There are a lot more internal or external problems you will have with your Mobile phones and so we solve or repair it in a very systematic and professional way.

No one likes a faulty smartphone: When you keep more or less your whole life on a device, you need that gadget to keep functioning properly. Unfortunately, bugs, crashes, and other issues are inevitable, especially as your phone gets older. On the bright side, many of the most common issues have relatively simple fixes—which you can perform yourself.

If you suspect that your mobile device is faulty, then follow these simple set of steps

  • If your phone does turn on, your battery might be out of charge. Charge your battery like you usually do, but make sure it is fully plugged in the phone or the computer or wall charger. You should also remove the battery from the phone and use a rag to brush away dirt. Reconnect, make sure the battery is correctly re-installed and try again.
  • If your battery is not charging, you might try plugging another electrical device into the outlet to verify this outlet works. Replace your charger or battery if necessary.
  • If your phone gets wet, remove the battery from the phone and allow both the phone and the battery to thoroughly dry. If you find rust or corrosion on the battery, wipe it off with a stiff brush. Try out the phone and if it still does not work, you might need to replace your battery.
  • If your display is not working, it may be due to extreme temperatures. Let your phone come to room temperature. Your display should come back up.
  • If the keys on your cell phone don’t work, look for a symbol on your display screen that looks like a lock. You may have inadvertently locked your keypad. The display should tell you how to unlock your phone
  • Check your volume if you cannot hear the other person. It is easy to forget that there is a volume control on your phone. Having your volume control turned down low is a very common mistake.
  • It is so annoying to not receive calls when you know they are coming in. Confirm that your call forwarding or automatic voice control is not activated. Check the ringer volume and confirm that your rings are not in the silent mode.

The problem may be beyond your scope of knowledge. Get in touch with professionals to help you with repairs like Mobile Phone Repair Qatar, a trusted Mobile Service Centre in Qatar for Huawei repairs, HTC repairs, Lenovo repairs, iPhone repairs and more at Doha. We are here to assist you with all your software and hardware problems with your Mobile device.